Metcalfe Potato Peeler (15lb/6.8kg), NA15

Hover over image to zoom

More Views

Metcalfe Potato Peeler (15lb/6.8kg), NA15

Quickfind: 5P153

• Constructed from food grade, non-corrosive, aluminium alloy castings
• Spindle housing and chute cast integrally, eliminating joints and possible leakage
• Available in grey hammer paint finish or in a natural aluminium
• Pedestal is 90cm high, making the discharge chute 94cm (37") high
• Sink-top/counter-top, pedestal or trolley mounted
• Complies with all relevant safety standards and designed for ease of maintenance and cleaning
• No lubrication is required. All bearings are grease packed and permanently sealed
• V- belt driven for noiseless transmission, with provision for belt tensioning if required
• Rotor plate coated on both sides, doubling its life. Fine grained abrasive for new potatoes on one side and coarse grained for regular potatoes on the other
• Inside wall of peeling chamber has patented cast-in abrasive serrations which dispenses with the need for abrasive coating. Consequently there is less potato loss during both peeling and boiling and the effciency of the serrations will last the life of the machine
• Top casting removable without tools so that the rotor plate can be lifted out. Turn on water and the whole machine is flushed clean. Cleaning should be carried out on a daily basis

View full description

Description

Details

  • Dimensions: 576 x 354 x 446mm (dxwxh)
  • Weight: 30kg/66lbs
  • Motor: 0.33 hp
  • Natural Aluminium Finish
  • Water inlet. Hose union with nozzle and provision for fitting on either side
  • Water outlet. Tapped 11⁄2" BSP ready for waste pipe to be connected.
  • Provision for fitting on either side
    Optional extras
  • Guarded discharge chute protects the operator by allowing the door to the chamber to be opened which stops hand access through the door aperture whilst the machine is working
  • Waste disposal adaptor. Waste pipe can be connected direct to the drain. Gives an additional water supply to the waste outlet to flush away the sludge. Water Byelaws Scheme approved product when connected to water header tank
  • External interceptor with tank and basket; a sink basket only or a length of waste pipe with elbow and coupling, if required
  • 3ft length water inlet hose and tap connector
  • Reviews

    Be the first to review this product

    Write Your Own Review

    You're reviewing: Metcalfe Potato Peeler (15lb/6.8kg), NA15

    How do you rate this product? *

     
    1 1 star
    2 2 star
    3 3 star
    4 4 star
    5 5 star
    Quality
    Price
    Value
    More From This Manufacturer View All
    Customers Also Viewed
    Price on Application

    Leasing Options