Metcalfe 14lb low pedestal potato peeler, 1ph

Hover over image to zoom

More Views

Metcalfe 14lb low pedestal potato peeler, 1ph

Quickfind: 5P145

• Powerful direct gear drive motors. The 14lb (6.3kg) and the 28lb (12.6kg) models have 0.5hp geared units
• Low or high (sink height) pedestal models available
• Designed to enable the user to operate, clean and maintain with the minimum of effort
• Motor and gearbox units are housed inside the pedestal therefore no external projections
• The drive between the output shaft of the unit and the drive shaft of the peeler is by means of a fexible coupling which will prevent damage to the motor or gearbox if the machine is accidentally jammed or overloaded
• Top casting removable without tools so that the rotor plate can be lifted out. Turn on water and the whole machine is flushed clean. Cleaning should be carried out on a daily basis
• Rotor plate bonded with abrasive grit. Inside wall of peeling chamber has patented cast-in abrasive serrations
which dispenses with the need for abrasive coating. Consequently there is less potato loss during both peeling and boiling and the effciency of the serrations will last the life of the machine
• All Metcalfe pedestal peelers are available with either single phase or three phase motors
• All single phase peelers are supplied with a wall mounted starter which incorporate the ‘on’ switch, emergency stop, no-volt release, overload protection features and are tted with a 13amp plug
• All three phase peelers are supplied with cord only
• Hammer grey painted finish
• Machines fitted with a water inlet and hose connection incorporating an air break. Stop tap can be fitted if required. Provision for fitting water inlet on either side of machine
• Waste outlet screwed 2" BSP female

View full description



  • Dimensions: 491 x 476 x 975mm (dxwxh)
  • Capacity: 14lbs/6.3kg
    Optional Extras
  • Guarded discharge chute protects the operator by allowing the door to the chamber to be opened which stops hand access through the door aperture whilst the machine is working
  • Waste disposal adaptor. Waste pipe can be connected direct to the drain. Gives an additional water supply to the waste outlet to flush away the sludge. Water Byelaws Scheme approved product when connected to water header tank
  • External interceptor with tank and basket
  • 3ft length water inlet hose and tap connector
  • Reviews

    Be the first to review this product

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register

    More From This Manufacturer View All
    Price on Application

    Leasing Options